Device Settings: Baseboards

Last updated: October 28, 2026

Device settings let you change how Mysa for Electric Baseboard Heaters looks and operates.

To open the device settings, select your Mysa in the Mysa app. Then tap the Settings tab.

Thermostat Info

  • Mysa Name: Change the name of your Mysa, for example "Living Room" or "Bedroom".

  • Time Zone: Set the correct time zone, so that your schedule starts at the correct time.

  • MAC Address, Model and Device Version: Information for support.

Thermostat Display

  • Brightness Settings: Set the wake brightness and the sleep brightness of the screen.

  • Adaptive Brightness (Gen3 and V2): The screen brightness changes with the light in the room.

  • Wake on Approach (Gen3 and V2): The screen becomes brighter when you go near Mysa.

  • Button Lock: Stops temperature changes on Mysa. You can change the temperature in the Mysa app.

  • Hardware Lockout Options (Gen3): Set what people can change on Gen3. Select None, Limit or Full. Gen3 uses this setting, not Button Lock.

Note: Lite has physical buttons. Lite does not have Adaptive Brightness or Wake on Approach. On Lite, use Brightness Settings to set the brightness.

Thermostat Preferences

  • Temperature Format: Celsius or Fahrenheit.

  • Heater Type: Select the type of your heater. V1 and Gen3: Baseboard, Fan Forced or Radiant. V2 and Lite: Baseboard or Fan Forced. Refer to Selecting Your Heater Type.

  • Hardware Setpoint Limits (V1, V2 and Lite): Set the lowest temperature and the highest temperature that people can set on Mysa. These limits apply only on Mysa, not in the Mysa app. They can help in rentals and shared spaces. On Gen3, use Hardware Lockout Options.

Note: In Heat mode, the lowest setpoint is 5°C (41°F). When Mysa is off, Mysa does not control the temperature. Mysa does not turn on the heat at any temperature.

Smart home

To connect Mysa to a smart home app, refer to Smart Home Integration.

Remove Mysa from your account

When you remove Mysa from your account, you cannot control it from the app. Mysa continues to control the heat. Mysa stays at its current temperature and no longer follows your schedule. Use the arrows on Mysa to change the temperature.

Only the primary homeowner can remove a Mysa.

  1. Open the Mysa app and select your Mysa.

  2. Tap the Settings tab.

  3. Tap Delete Device.

  4. Tap Confirm.

For more information, refer to Removing and Resetting Your Thermostat.

Temperature offset

Temperature offset corrects a constant difference between the temperature on Mysa and the temperature in the room. Change the offset only for a difference that stays constant.

  • Gen3: Gen3 has temperature offset. Refer to Using temperature offset with Gen3.

  • Lite: Lite has temperature offset on firmware 3.17.1.2 or newer. Refer to Temperature Offset for Baseboard Lite.

  • V2: V2 does not have temperature offset.

Get support

Email: support@getmysa.com

For help with schedules, geofencing, sharing, shortcuts, smart alerts, homes, zones, energy, Wi-Fi and more, refer to the Mysa App help section.