Device Settings — Mysa for In-Floor Heating

Last updated: February 19, 2026

Device Settings — Mysa for In-Floor Heating

Access device settings to configure temperature mode, calibrate your floor sensor, and customize your thermostat.

Accessing Device Settings

  1. Open the Mysa app
  2. Tap the In-Floor thermostat
  3. Tap the gear icon or Settings

Available Settings

Temperature Mode

Switch between Ambient and Floor mode:

  • Ambient mode: Controls to room temperature (5–30°C)
  • Floor mode: Controls to floor surface temperature (up to 40°C)

You can change modes anytime—no reinstallation required.

Floor Sensor Calibration

If using a sensor other than the included 10K Ohm sensor:

  1. Tap Floor Sensor
  2. Select your sensor's resistance value (5K–40K Ohm)
  3. Tap Save

Smart Limit Protection

Set a maximum floor temperature to protect your flooring:

  1. Tap Smart Limit Protection
  2. Set the maximum temperature (default: 30°C)
  3. Tap Save

Temperature Units

Switch between Celsius and Fahrenheit:

  1. Tap Temperature Units
  2. Select °C or °F

Device Name

Rename your thermostat:

  1. Tap Device Name
  2. Enter a new name (e.g., "Bathroom Floor")
  3. Tap Save

Room Assignment

Move the thermostat to a different room:

  1. Tap Room
  2. Select a room or create a new one
  3. Tap Save

Firmware Version

View your thermostat's current firmware version. Firmware updates are applied automatically when available.

Need Help?

Contact our support team at support@getmysa.com