Scheduling

Scheduling

Set up weekly heating schedules so your Mysa for Baseboards automatically adjusts temperature throughout the day. Scheduling is the #1 way to save energy with your Mysa.

Tip ENERGY STAR® recommends setting your thermostat 7°C (12°F) cooler while away and 4°C (7°F) cooler while sleeping for optimal energy savings.

How Scheduling Works

Schedules repeat weekly. You set temperature changes for specific times, and Mysa follows them automatically. Between scheduled events, the thermostat holds the last setpoint.

Creating a Schedule

1. Open the Mysa app and select your thermostat
2. Tap Schedule
3. Tap Add Event or tap a time slot
4. Set the time and temperature (or Off)
5. Choose which days this event repeats
6. Tap Save

Schedule Modes

Each scheduled event can be set to:

• Heat — Set a target temperature
• Off — Heating is disabled during this period

Note Scheduling "Off" doesn't turn off the schedule itself — it tells the thermostat not to heat during that time. The schedule remains active and will resume heating at the next scheduled event.

Schedule Limits

• Maximum 56 events per week across all days
• Events can be set at any minute increment

Editing a Schedule

1. Tap Schedule on your thermostat
2. Tap the event you want to change
3. Adjust the time, temperature, or days
4. Tap Save

To delete an event, tap it and select Delete.

Copying a Day's Schedule

To copy one day's schedule to other days:

1. Go to the Schedule screen
2. Tap Copy Day at the bottom
3. Select the day(s) to copy to
4. Tap Next and Okay to save

Deleting a Schedule

To delete the entire schedule (not just one event):

1. Go to the Schedule screen
2. Tap the three dots in the top right corner
3. Select Delete Schedule

Early On (V2 and V1 Only)

Early On pre-heats your space so it reaches your target temperature at the scheduled time, rather than starting to heat at that time.

• Pre-heats up to 30 minutes before scheduled changes
• Enabled by default
• Available on V2 and V1 only — Lite does not support Early On

To toggle Early On:

1. Go to the thermostat's Schedule screen
2. Tap the three dots in the top right corner
3. Toggle Early On on or off

Saved Schedules (V2 and V1 Only)

V2 and V1 let you save schedules and apply them to other thermostats of the same type.

1. Create a schedule on one thermostat
2. Tap the three dots in the top right corner of the Schedule screen
3. Tap Save Schedule and give it a name
4. On another thermostat of the same type, go to the Schedule screen
5. Tap the three dots and select Apply Saved Schedule
6. Select the saved schedule

Saved schedules are product-specific — V2 schedules can only be applied to other V2 devices, and V1 schedules can only be applied to other V1 devices.

Note Lite does not support Saved Schedules.

Schedule Holds

Sometimes you need to override your schedule temporarily.

Hold Temperature (Indefinite)

Adjust the temperature from the app and select Hold Temperature. The thermostat stays at this temperature until you manually change it or select Resume Schedule.

Hold Until a Specific Date and Time

Adjust the temperature, select Hold Until, and choose the end date and time. When the hold expires, the thermostat returns to its schedule automatically.

Tip Use timed holds for vacations. Set a lower temperature while away, scheduled to return to normal before you arrive home.

Resuming Your Schedule

Tap Resume Schedule in the app to cancel any hold and return to automatic scheduling.

Manual Adjustments on the Device

If you adjust the temperature directly on the thermostat, it holds that temperature until the next scheduled event.

Note You cannot create or edit schedules from the thermostat itself — scheduling is app-only. The device buttons only create temporary overrides.

Shared User Permissions

Shared users can create and edit schedules. Only the primary account owner can create saved schedules.

Need Help?

Email: support@getmysa.com