Google Home Setup — Mysa for In-Floor Heating

Add your Mysa for In-Floor Heating to Google Home to control your floor heating with Google Assistant voice commands and create custom routines for your home.

Requirements

To use Mysa for In-Floor with Google Home, you'll need:

• Google Home device — Google Home, Home Mini, Home Max, or any Google Assistant-enabled device

• Google Home app — Installed on your smartphone or tablet (iOS or Android)

• Mysa account — Active Mysa account with your In-Floor thermostat already set up in the Mysa app

• Google Account — Required to link services and control devices remotely

• 2.4 GHz Wi-Fi connection — Your Mysa and Google Home device must be on the same Wi-Fi network

Tip: A Google Home device or Nest Hub lets you control and monitor your thermostat from anywhere. Make sure your Google account is the same one used on your Google Home device.

Link Mysa to Google Home App

Follow these steps to connect your Mysa account to Google Home:

1. Open the Google Home app on your phone or tablet

2. Tap the + icon in the top right corner

3. Tap Set up device

4. Select Link apps or services from the list

5. Search for "Mysa" in the search bar

6. Tap the Mysa result

7. You'll be directed to sign in with your Mysa credentials

8. Enter your Mysa email address and password

9. Tap Sign In

10. Grant Google Home permission to access your Mysa account

11. Return to the Google Home app — your devices should now appear

Note: If devices don't appear immediately, wait 30 seconds and refresh the app, or close and reopen the Google Home app.

Assign Thermostats to Rooms

Properly assigning rooms makes voice commands more natural and helps Google Assistant respond accurately:

1. In the Google Home app, open the Home tab

2. Find your Mysa In-Floor thermostat in the device list

3. Tap and hold the thermostat tile

4. Tap the settings gear icon

5. Tap Room assignment or Assign to a room

6. Select the room where your thermostat is located (e.g., "Bathroom," "Bedroom," "Living Room")

7. Tap Save or Assign

Tip: Use specific room names like "Master Bedroom" or "Downstairs Bathroom" rather than just "Bedroom" if you have multiple thermostats in different rooms.

Google Assistant Voice Commands

Note: Use the exact room name you assigned during setup. Google Assistant responds best when you include the room name and temperature value.

Create Custom Routines

Beyond voice commands, you can create routines to automate your floor heating:

1. Open the Google Home app

2. Tap your profile icon in the top right

3. Tap Assistant settings

4. Scroll down and tap Routines

5. Tap Create routine (+ icon)

6. Give your routine a name (e.g., "Morning Floor Heat")

7. Set a trigger (time, phrase, or schedule)

8. Tap Add action

9. Search for your Mysa thermostat

10. Select the action (set temperature, turn on/off)

11. Choose your target temperature

12. Tap Save

Example routines:

• "Good morning" phrase → sets bathroom floor to 24°C and bedroom to 22°C

• Weekday at 6:00 AM → automatically set basement floor to 20°C

• "Bedtime" phrase → sets all floor thermostats to 18°C

• When you arrive home → restores previous temperature settings

Troubleshooting Connection Issues

Can't link Mysa account to Google Home

• Verify you're using the correct Mysa account credentials

• Check that your Mysa account is active and in good standing

• Confirm you're using the same Google account that's set up on your Google Home device

• Clear the Google Home app cache and try again

• Sign out of your Google account in the app and sign back in

Devices won't appear or sync

• Ensure your Mysa thermostat is connected to Wi-Fi and shows as "Online" in the Mysa app

• Confirm both your Google Home device and Mysa are on the same 2.4 GHz network

• Unlink Mysa from Google Home and re-link it:

- In Google Home app, go to Settings → Services → Mysa → Unlink - Wait 30 seconds, then re-link by following the "Link Mysa to Google Home App" steps above

• Restart your Google Home device and Mysa thermostat (wait 2 minutes)

Voice commands aren't working

• Verify the thermostat is assigned to a room in Google Home app

• Confirm the thermostat shows as "Online" in Google Home

• Use the exact room name in your voice command

• Try saying the command more clearly (e.g., "Set bathroom floor to 23 degrees")

• Check the Google Home app activity log to see if Google is hearing your commands correctly

Google Assistant can't control the thermostat

• Make sure the Mysa account link is still active (check Services in Assistant settings)

• Verify your Mysa thermostat is showing in the Google Home app device list

• Test controlling the thermostat manually from the Google Home app to confirm it's responsive

• Re-authorize the Mysa service: Unlink and re-link following the troubleshooting steps above

Routines aren't triggering

• Confirm the thermostat is listed as available when setting up the routine action

• Verify the thermostat shows as "Online" in the Google Home app

• Test the routine manually by tapping "Run" in the routine details

• Make sure the trigger is set correctly (voice phrase, time, or schedule)

• Check that your Google Home device is online and has an active connection

Temperature commands get different results than expected

• Confirm you're using Celsius (°C) in your commands — Google Home uses the unit set in your device settings

• Try rephrasing the command: Instead of "Make the bathroom warmer," say "Set the bathroom to 24 degrees"

• Check the current temperature in the Mysa app to understand what command is needed

• Some phrases like "turn up the heat" may not work — use specific temperature values instead

Still having issues? If you continue to experience problems with Google Home integration, our support team is ready to help.

Contact support@getmysa.com