Google Home

Last updated: October 7, 2026

Google Home

Connect Mysa to Google Home to control your thermostats with Google Assistant voice commands or include them in Google Home routines.

Applies to: Mysa for Baseboards (V1, V2, and Lite) and Mysa for In-Floor Heating.

Gen3 is different. It does not use these steps. Connect it through Matter instead: Gen3: Connecting to your Smart Home using Matter.

Connecting to Google Home

  1. Open the Google Home app

  2. Tap + (top left)

  3. Tap Set up device

  4. Select Works with Google

  5. Search for "Mysa" and select it

  6. Sign in with your Mysa account credentials

  7. Select the thermostats you want to add

  8. Assign each thermostat to a room

What You Can Do

Once connected, you can:

  • Control Mysa with Google Assistant voice commands

  • Include Mysa in Google Home routines

  • Control Mysa from Nest Hub displays

  • Use Google Home app for quick adjustments

Google Assistant Voice Commands

Check Temperature

  • "Hey Google, what's the temperature in the [room name]?"

  • "Hey Google, what's the [room name] set to?"

  • "Hey Google, what is the humidity in the [room name]?" (Mysa for Baseboards V2 and V1 only)

Set Temperature

  • "Hey Google, set the [room name] to [temperature]"

  • "Hey Google, set the temperature in the [room name] to [temperature]"

Adjust Temperature

  • "Hey Google, increase the temperature in the [room name]"

  • "Hey Google, decrease the temperature in the [room name]"

  • "Hey Google, turn up the [room name]"

  • "Hey Google, turn down the [room name]"

Turn Off

  • "Hey Google, turn off the [room name] thermostat"

  • "Hey Google, set the [room name] thermostat to off"

Google Home Routines

Create routines to automate your thermostats:

  1. Open the Google Home app

  2. Tap Automations at the bottom

  3. Tap + Add to create a new routine

  4. Set a starter (time, voice command, sunrise/sunset, etc.)

  5. Add an action — tap Adjust home devices then select your Mysa

  6. Set the temperature

Example routines: "Good morning" (warm up the house), "Leaving home" (set back temperatures), "Bedtime" (lower for sleeping).

Household Routines

Google Home supports household routines that can trigger based on when anyone leaves or arrives:

  1. Open the Google Home app

  2. Tap Automations

  3. Create a Household routine

  4. Set the trigger (when everyone leaves, when first person arrives)

  5. Add your Mysa thermostats as actions

This works similarly to Mysa's built-in geofencing feature.

Troubleshooting

Google Home can't find Mysa:

  • Make sure your Mysa is online in the Mysa app first

  • In the Google Home app, go to Settings > Works with Google > Mysa and tap Reconnect

  • Try unlinking and relinking your Mysa account

Commands not working:

  • Use the exact room name assigned in Google Home

  • Try rephrasing: "Hey Google, set [room name] thermostat to [temperature]"

  • Check that your Mysa is online in the Mysa app

Account won't link:

  • Make sure you're using your Mysa account credentials (not Google)

  • Check your internet connection

  • Try again in a few minutes

Temperature shows wrong:

  • Google Home uses your Mysa app's temperature unit setting

  • Check the unit setting in the Mysa app (Settings > Temperature Format)

Unlinking from Google Home

  1. Open the Google Home app

  2. Tap Settings (gear icon)

  3. Tap Works with Google

  4. Find and tap Mysa

  5. Tap Unlink account

Need Help?

Email: support@getmysa.com