Pairing Your Mysa for Baseboards

Pairing Your Mysa for Baseboards

This guide walks you through connecting your Mysa for Baseboards to the Mysa app.

Before You Begin

• Latest Mysa app: Check the App Store or Google Play to make sure you have the latest version
• Primary account user: You must be the primary user of the Mysa account to add a thermostat. If you're a shared user, you won't be able to add new devices.
• Thermostat powered on and displaying the Pairing Mode icon
• Phone's Bluetooth enabled
• Your 2.4 GHz Wi-Fi network name and password ready — Double-check your password before starting. Common mistakes include capitalizing the first letter or adding trailing spaces.
• Phone within 1–2 meters of the thermostat

Pairing Mode Icons

V2 and Lite: Bluetooth symbol

Legacy V1: Wi-Fi symbol (upside down triangle)

If you don't see a pairing icon, the thermostat may already be paired or needs to be put into pairing mode.

Pairing Steps (V2 and Lite)

1. Open the Mysa App

Sign in to your account (or create one if you haven't already).

2. Add Your Thermostat

1. Tap Add Mysa from the main menu
2. Select Mysa for Baseboards from the product list
3. Grant Bluetooth permission when prompted

3. Connect via Bluetooth

1. Tap Next while standing near your thermostat
2. Tap Identify to confirm you've selected the correct device (the thermostat will flash)
3. Accept the pairing notification on your phone
4. Name your thermostat (e.g., "Living Room" or "Bedroom")

4. Connect to Wi-Fi

1. Select your 2.4 GHz Wi-Fi network
2. Enter your Wi-Fi password
3. Wait for the connection to complete

Note Mysa requires a 2.4 GHz network. If you only see your 5 GHz network, check your router settings to enable 2.4 GHz.

5. Select Your Heater Type

Choose the heater type that matches your heating system:

• Baseboard — For electric baseboard and convection heaters
• Fan-forced — For heaters with fans (including toe kick heaters)
• Radiant — For radiant ceiling or panel heaters

See Selecting Your Heater Type for details.

6. Firmware Update

After connecting, the app may install a firmware update. Keep the thermostat powered and the app open until complete — this can take several minutes.

Pairing Steps (Legacy V1)

Legacy V1 units use Wi-Fi pairing instead of Bluetooth:

1. Open the Mysa app and tap Add Mysa
2. Select Mysa for Baseboards
3. Follow the on-screen instructions to connect to the thermostat's Wi-Fi hotspot
4. Enter your home Wi-Fi credentials
5. The thermostat will connect to your network

Success

Once complete, you'll see:

• Your thermostat on the app home screen
• Current room temperature displayed
• Status shows Online

Troubleshooting

Thermostat Not Appearing

• Move closer (within 1–2 meters)
• Toggle Bluetooth off and back on
• Close and reopen the Mysa app
• Check that the thermostat isn't already paired to another account

Re-entering Pairing Mode

V2 and Lite: Hold both the up and down controls for 10 seconds until the Bluetooth symbol appears.

V1: Hold both up and down arrows for 10 seconds until the Wi-Fi symbol appears.

Pairing Fails Repeatedly

1. Close the app completely
2. Soft reboot the thermostat (hold up + down for 10 seconds)
3. Wait for the pairing icon to appear
4. Reopen the app and try again

Wi-Fi Connection Fails

• Confirm you're using a 2.4 GHz network (not 5 GHz)
• Check that your Wi-Fi password is correct
• Move your router closer or check for signal strength issues
• Restart your router if needed

Phone Settings for Pairing

iOS:

• Bluetooth must be ON
• Location Services must be ON with Precise Location enabled for the Mysa app
• Local Network Access must be enabled for the Mysa app (Settings > Privacy > Local Network)

Android:

• Bluetooth must be ON
• Location must be ON (required for Bluetooth scanning)
• Wi-Fi Assist or Smart Network Switch must be OFF (this feature can disconnect from Mysa during pairing)

Router Settings

If pairing repeatedly fails, check these router settings:

• Security: Use WPA2 or WPA2/WPA3 Transitional (not WPA3 only)
• MAC Filtering: Disable or add your thermostat's MAC address
• Band Steering: Disable if your router automatically switches devices between 2.4 GHz and 5 GHz
• Hidden Network: If your network is hidden, try temporarily making it visible during setup

Mesh or Merged Networks

If you have a mesh Wi-Fi system or a router that merges 2.4 GHz and 5 GHz into one network name:

1. Check if your router has a setting to separate the bands
2. If not, temporarily create a guest network on 2.4 GHz only for setup
3. Some mesh systems (like Google Wifi, Eero) work fine — try pairing closer to the main router node
4. After successful pairing, the thermostat will stay connected even on merged networks

True Hard Reset

If you've tried everything above and pairing still won't work, do a full reset of all devices:

1. Reboot your phone — Power it off completely, then turn it back on
2. Reboot your router — Unplug it, wait 30 seconds, plug it back in
3. Enter pairing mode — Hold up + down on the thermostat for 10 seconds until the pairing icon appears
4. Hard reboot the thermostat — Turn off the breaker that powers your thermostat, wait 30 seconds, turn it back on
5. Wait a few minutes — Let your phone, router, and thermostat fully boot up before continuing
6. Start fresh — Open the Mysa app and begin the pairing process again

Quick Checklist

Need Help?

Email: support@getmysa.com