Mysa for Baseboard firmware

Mysa Smart Thermostat Firmware 2.4.0 (Released July 20th,2020)

Firmware 2.4.0 is being released slowly to all devices starting July 20th, this automated process may take a few days to reach your device.

  • We've improved how Mysas handle reconnect after disconnected from the Wi-Fi network due to a power outage, making sure your commands are sent reliably.
  • Some Mysas had shown the habit of clinging onto a Schedule that had been removed from the App, we've fixed this memory glitch.
  • Setting the minimum set point temperature above 5°C (41°F) will no longer prevent you from rebooting your Mysa by holding the "Down" arrow.
  • We also added a 10 seconds countdown animation when resetting your Mysas, so you know how long you still need to hold the up and down arrows for. And if you change your mind about resetting it, you can just let go of the up and down arrows.
  • Plus various other Bug fixes and stability improvements.

Mysa Smart Thermostat Firmware 2.3.2 (Released February 16th, 2020 )

  • WiFi stability and reliability improvements 
  • Bug fixes and improvements

Mysa Smart Thermostat Firmware 1.4.2 (Released May 17, 2019)

  • Improved brightness features
  • Radiant 'on/off' control
  • Bug fixes and improvements

Mysa Smart Thermostat Firmware 1.3.0 (Released February 27, 2019)

  • Reduced bandwidth usage
  • Quicker communication between thermostat and app

Mysa Smart Thermostat Firmware 1.2.1 (Released November 28, 2018)

  • Bug fixes

Mysa Smart Thermostat Firmware 1.1.18 (Released October 31, 2018)

  • Improvements to Apple HomeKit stability and reliability
  • Added temperature to setpoint animation on the device
  • Fan-forced mode has a minimum on or off time of 1 minute
  • Improvements and bug fixes
Can’t find your answer in our support center? Contact us directly.