How can I change the WiFi Settings from the App?

Mysa will associate with only one Wifi network; if the thermostats can no longer connect to the original Wifi or the Wifi was changed, the thermostats will need to be reset and then setup onto the new network. This is shown in the video below. The steps are also written beneath the video for iOS and Android Users.


iOS Users

Step 1)

Turn off WiFi assist as it can interfere with the pairing process.

Launch Settings app > Tap cellular > Scroll down to the bottom of the screen and switch the WiFi Assist toggle to Off.

Launch the Settings app, tap Cellular, and then tap on the on/off switch next to Wi-Fi Assist.

Step 2)

Ensure you have deleted your thermostat from the Mysa App.

Mysa app > tap thermostat card > tap settings in the right-hand corner > tap the trash can icon

Screen_Shot_2019-04-10_at_3.38.37_PM.png

 

Step 3)

Ensure you have deleted the thermostat from the Apple Home App.

Apple Home app > tap edit > tap the thermostat you wish to remove > scroll down and tap Remove Accessory

Screen_Shot_2018-10-15_at_2.48.00_PM.png

 

Step 4)

Factory reset your Mysa thermostat (hold down on the up and downs arrows simultaneously for 10-15 seconds). The thermostat should reboot and the smiley face should appear. 

Step 5)

Reboot your Mysa Thermostat by turning the breaker off then back on.

Turn_off_the_circuit_breaker.png

Step 6)

Open the Mysa app and try to add your thermostat to the WiFi network again. 

Once it is paired and you can find it in the main app screen, it may show the disconnected symbol (a red exclamation mark over the Wi-Fi symbol) for roughly 30 seconds and then it will go away on it's own.

Android Users

 

 

 

Step 1)

Ensure you have deleted your thermostat from the Mysa App.

Mysa app > tap thermostat card > tap settings in the right-hand corner > tap the trash can icon.

Screen_Shot_2019-04-10_at_3.38.37_PM.png

 

Step 2)

Factory reset your Mysa thermostat (hold down on the up and downs arrows simultaneously for 10-15 seconds). The thermostat should reboot and the smiley face should appear. 

Step 3)

Reboot your Mysa Thermostat by turning the breaker off then back on.

Turn_off_the_circuit_breaker.png

Step 4)

Open the Mysa app and try to add your thermostat to the WiFi network again. 

Once it is paired and you can find it in the main app screen, it may show the disconnected symbol (a red exclamation mark over the Wi-Fi symbol) for roughly 30 seconds and then it will go away on it's own.

If you're still having trouble with your thermostat, please reach out to our support team if you have any further questions!

Can’t find your answer in our support center? Contact us directly.