Apple HomeKit

Connect your Mysa for Mini-Splits to Apple HomeKit to control your mini-split with Siri, the Home app, or include it in HomeKit automations and scenes.

Connecting to HomeKit

Setup is done through the Apple Home app. You have two options:

Option 1: Scan HomeKit Code

1. Open the Home app on your iPhone or iPad
2. Tap + then Add Accessory
3. Scan the HomeKit code on your Mysa (sticker included in box, or find in Mysa app under Settings > HomeKit)
4. Follow the prompts to add Mysa to your home
5. Assign it to a room

Option 2: NFC Tap (iPhone only)

1. Hold your iPhone near Mysa
2. A prompt will appear to add the accessory
3. Tap to pair — no code needed

Finding Your HomeKit Code

The 8-digit HomeKit setup code can be found:

• On the HomeKit sticker included in the box
• On a label on the back of your Mysa device
• In the Mysa app: Thermostat > Settings > HomeKit

Siri Voice Commands

Check Temperature

• "Hey Siri, what's the temperature in the [room name]?"
• "Hey Siri, what's the [room name] set to?"

Set Temperature

• "Hey Siri, set the [room name] to [temperature]"
• "Hey Siri, make the [room name] warmer"
• "Hey Siri, make the [room name] cooler"

Change Mode

• "Hey Siri, set the [room name] to heat"
• "Hey Siri, set the [room name] to cool"
• "Hey Siri, turn off the [room name]"

HomeKit Scenes

Create scenes to set multiple devices at once:

1. Open the Home app
2. Tap + then Add Scene
3. Create a custom scene
4. Add your Mysa and set the temperature/mode
5. Add other accessories if desired
6. Name the scene (e.g., "Good Night," "I'm Leaving")

Activate scenes by tapping them or saying "Hey Siri, [scene name]."

HomeKit Automations

Create automations that trigger based on time, location, or other events:

1. Open the Home app
2. Go to Automation
3. Tap + to create a new automation
4. Choose a trigger (time of day, when you leave/arrive, etc.)
5. Select your Mysa and set the action

Example automations:

• When everyone leaves → Set mini-split to 26°C (cool) or 16°C (heat)
• At sunset → Set to comfortable evening temperature
• When I arrive → Turn on cooling

Troubleshooting

HomeKit code not working:

• Make sure you're entering the code exactly as shown
• Try scanning the QR code instead of typing
• Check that your Mysa is online in the Mysa app

Mysa not responding to Siri:

• Use the exact room name assigned in HomeKit
• Check that Mysa shows as "Connected" in the Home app
• Ensure your Mysa is online in the Mysa app

Commands delayed:

• Normal — IR commands take a moment to transmit and process
• Check Wi-Fi signal strength at your Mysa's location

Removing from HomeKit

1. Open the Home app
2. Long-press on your Mysa
3. Scroll down and tap Remove Accessory

Need Help?

Email: support@getmysa.com